Optimization of cooling during high-speed deep grinding with tools made of cubic boron nitride

Authors

  • Volkov Dmitri Ivanovich Rybinsk State Aviation Technical University named after P. A. Solovyov
  • Tsvetkov Boris Victorovich “Ilyich Abrasive Company”
  • Golovanova Anna Mikhailovna Rybinsk State Aviation Technical University named after P. A. Solovyov

Keywords:

high-speed creep feed grinding, highly porous tools, cubic boron nitride, optimization of coolant supply

Abstract

The results of a study of the supply of a coolant by a porous abrasive wheel to the processing zone during high-speed creep feed grinding are presented. A method is presented for determining the optimal position of the nozzle in relation to the abrasive wheel and the workpiece, ensuring the absence of burns on the machined surface when grinding with a tool based on cubic boron nitride (CBN).

Author Biographies

Volkov Dmitri Ivanovich, Rybinsk State Aviation Technical University named after P. A. Solovyov

Doctor of Technical sciences, Professor, Head of the Department “Mechatronic Systems and Shaping Processes” named after S. S. Silin, Rybinsk State Aviation Technical University named after P. A. Solovyov

Tsvetkov Boris Victorovich, “Ilyich Abrasive Company”

Candidate of Technical Sciences, Head of the Research and Innovation Department at “Ilyich Abrasive Company”

Golovanova Anna Mikhailovna, Rybinsk State Aviation Technical University named after P. A. Solovyov

postgraduate student of the Department “Mechatronic Systems and Shaping Processes” named after S. S. Silin, Rybinsk State Aviation Technical University named after P. A. Solovyov

Downloads

Published

2024-15-08

Issue

Vol. 28 No. 2(104) (2024)

Section

******************************