Vol. 16 No. 5 (50) (2012): Вестник УГАТУ

Published: 2018-08-08

Development of the universal software complex for solving optimization problems of parameters and flow path of GTE using models with private code

Igor Aleksandrovich Krivosheev, Yuliya Andreevna Hohlova, Roman Alekseevich Zavyalov

3-12
- PDF (Русский)
Assessment turbine drive using information building statistical manual

Anas Saidovich Gishvarov, Evgeniy Anatolevich Mogilnickiy, Ilshat Ilfirovich Gizzatullin

13-19
- PDF (Русский)
Analysis of using shaped cooling holes to improve the quality of film cooling on the suction side of turbine nozzle guide vanes

Aleksey Sergeevich Tihonov, Nikolay Yurevich Samohvalov

20-27
- PDF (Русский)
Determining the GTE’s turbine efficiency according to the parameters of irregular gas flow

Vyacheslav Moiseevich Kofman

28-40
- PDF (Русский)
The temperature dependence of elasticity modulus for TiAl and Ni3Al – basic alloy components for turbine rotor blade

Ildar Haydarovich Badamshin, Olesya Igorevna Kusova

41-43
- PDF (Русский)
Diagnosis of the technical state of the fuel UNIT GTE in operating conditions

Anas Saidovich Gishvarov, Dmitriy Aleksandrovich Smyshlyaev

44-47
- PDF (Русский)
Gas turbine engines and gas turbine power plants compressors early design stages effectiveness increase

Aleksandra Borisovna Mihaylova, Dmitriy Albertovich Ahmedzyanov, Aleksey Evgenevich Mihaylov

48-59
- PDF (Русский)

Design and implementation of a software package for analysis and synthesis of complex technical objects

Rustem Dalilovich Enikeev, Andrey Aleksandrovich Chernousov

60-68
- PDF (Русский)
Method of evaluation of the thermodynamic performance piston engine with variable compression ratio at an early stage

Ilya Lvovich Zaharov, Vladimir Leonidovich Himich, Lev Anatolevich Zaharov

69-74
- PDF (Русский)
Optimization of constructive and adjusting parameters of diesel engine by means of artificial neural network

Vladimir Samoylovich Kukis, Vladimir Aleksandrovich Sinicyn, Vladimir Petrovich Bosyakov

75-79
- PDF (Русский)
Parameters modelling for diesel engines working at the external high speed characteristic

Boris Aleksandrovich Sharoglazov, Marat Fagitovich Safarov

80-82
- PDF (Русский)
Distribution of re-sidual stresses in details permanent joints made of nanostruc-tured titanium alloy BT6

Vladimir Sergeevich Zhernakov, Tamara Nikolaevna Mardimasova, Marat Rashitovich Arslanov

83-88
- PDF (Русский)
Change of the law of distribution of speed of ultrasonic waves at cyclic of steel in low-cyclic area

Andrey Mihaylovich Schipachev, Evgeniy Anatolevich Naumkin, Iskander Rustemovich Kuzeev

89-92
- PDF (Русский)
The research of gaz-liquid mix structure influence on gaz separation process efficiency in the centrifugal gasseparator

Maksim Grigorevich Volkov, Valeriy Germanovich Mihaylov, Pavel Valerevich Petrov

93-99
- PDF (Русский)
The pulsatory hydrojet engine

Andrey Vyacheslavovich Novikov, Dmitriy Sergeevich Hantalin, Vasiliy Ivanovich Bogdanov

100-102
- PDF (Русский)
Concept of compound energy systems hydroautomatic devices researches

Anna Aleksandrovna Koeva, Pavel Valerevich Petrov

103-108
- PDF (Русский)
Features of fluid filter element with different principles of filtration

Dmitriy Evgenevich Tuk, Artur Albertovich Garipov, Vladimir Aleksandrovich Celischev

109-114
- PDF (Русский)
The pneumatic isle of the company Festo: the example for programming of vacuum ejector

Shamil Rashitovich Gallyamov, Konstantin Viktorovich Starikov, Vladimir Aleksandrovich Celischev, Albert Shafkatovich Halitov

115-120
- PDF (Русский)
The formation fluid sampler

Shamil Rashitovich Gallyamov, Oleg Mihaylovich Dubrovin, Arsen Vladimirovich Mesropyan, Kamil Amirovich Hismatullin

121-127
- PDF (Русский)
Simulation by the method of flight and blow large particles of a liquid drop about the firm surface

Ernst Gaysovich Gimranov, Anton Aleksandrovich Olhov, Anton Vyacheslavovich Svistunov, Liya Fanilevna Hakimova

128-131
- PDF (Русский)
Features of high-speed dissolution of iron-chromium-nickel alloy ХН35ВТЮ at electrochemical machining

Nailya Anvarovna Amirhanova, Vladimir Engelevich Galiev, Svetlana Vladimirovna Ustyuzhanina

132-136
- PDF (Русский)
Study of fine-dispersed powders of brazing on nickel-based with regard to obtaining high-tech semi-finished product in the form of self-adhesive tape on an organic binder

Olga Gennadevna Ospennikova, Aleksandr Gennadevich Evgenov, Svyatoslav Vasilevich Nerush, Aleksandr Nikolaevich Afanasev-Hodykin

137-144
- PDF (Русский)
The impact of combined thermomechanical treatment on the structure and mechanical properties high carbon bearing steel

Yana Igorevna Nasedkina, Marina Vladimirovna Karavaeva, Oskar Akramovich Kaybyshev

145-148
- PDF (Русский)
Methodology of membranes with enhanced performance propertiesand technologies deposited on GTE blade kompressor

Viktor Sergeevich Muhin, Vladimir Vasilevich Budilov, Semen Romanovich Shehtman

149-153
- PDF (Русский)
About one problem of electrochemical machining of metals with the account variability of the current efficiency for anode shaping reaction

Nail Mirgaziyanovich Minazetdinov

154-159
- PDF (Русский)
High-temperature oxidation influence on composition and structure of aluminide coating on ion implanted surface of nickel alloy

Andrey Aleksandrovich Bybin

160-167
- PDF (Русский)

Approaches to compensation geomagnetic noise control parameters for industrial network

Georgiy Vladimirovich Milovzorov, Andrey Vladimirovich Vorobev, Gulnaz Tabrisovna Garipova

168-172
- PDF (Русский)
Competitiveness items at the stage of the development

Hakimzyan Amirovich Fashiev

173-184
- PDF (Русский)
The approach to operation of aviation mechanical engineering enterprise on the production model of business-processes basis

Ramil Yavatovich Lutfullin, Anatoliy Gennadevich Tyurganov, Eduard Vilardovich Safin, Amir Kamilovich Galimov

185-190
- PDF (Русский)

Vol. 16 No. 5 (50) (2012): Вестник УГАТУ

Development of the universal software complex for solving optimization problems of parameters and flow path of GTE using models with private code

Assessment turbine drive using information building statistical manual

Analysis of using shaped cooling holes to improve the quality of film cooling on the suction side of turbine nozzle guide vanes

Determining the GTE’s turbine efficiency according to the parameters of irregular gas flow

The temperature dependence of elasticity modulus for TiAl and Ni3Al – basic alloy components for turbine rotor blade

Diagnosis of the technical state of the fuel UNIT GTE in operating conditions

Gas turbine engines and gas turbine power plants compressors early design stages effectiveness increase

Design and implementation of a software package for analysis and synthesis of complex technical objects

Method of evaluation of the thermodynamic performance piston engine with variable compression ratio at an early stage

Optimization of constructive and adjusting parameters of diesel engine by means of artificial neural network

Parameters modelling for diesel engines working at the external high speed characteristic

Distribution of re-sidual stresses in details permanent joints made of nanostruc-tured titanium alloy BT6

Change of the law of distribution of speed of ultrasonic waves at cyclic of steel in low-cyclic area

The research of gaz-liquid mix structure influence on gaz separation process efficiency in the centrifugal gasseparator

The pulsatory hydrojet engine

Concept of compound energy systems hydroautomatic devices researches

Features of fluid filter element with different principles of filtration

The pneumatic isle of the company Festo: the example for programming of vacuum ejector

The formation fluid sampler

Simulation by the method of flight and blow large particles of a liquid drop about the firm surface

Features of high-speed dissolution of iron-chromium-nickel alloy ХН35ВТЮ at electrochemical machining

Study of fine-dispersed powders of brazing on nickel-based with regard to obtaining high-tech semi-finished product in the form of self-adhesive tape on an organic binder

The impact of combined thermomechanical treatment on the structure and mechanical properties high carbon bearing steel

Methodology of membranes with enhanced performance propertiesand technologies deposited on GTE blade kompressor

About one problem of electrochemical machining of metals with the account variability of the current efficiency for anode shaping reaction

High-temperature oxidation influence on composition and structure of aluminide coating on ion implanted surface of nickel alloy

Approaches to compensation geomagnetic noise control parameters for industrial network

Competitiveness items at the stage of the development

The approach to operation of aviation mechanical engineering enterprise on the production model of business-processes basis

Information

Make a Submission

Language