Vol. 19 No. 1 (67) (2015): Вестник УГАТУ

2D flow calculation investigation method for GTE multistage axial compressors

Lyudmila Georgievna Boyko, Aleksandr Evgenevich Demin, Oleg Nikolaevich Drynov, Vera Alekseevna Kalyuzhnaya

3-12
- PDF (Русский)
Optimization of the working process parameters of a turbofan engine of high-altitude unmanned aerial vehicle

Yuriy Vladimirovich Zinenkov, Aleksandr Valerevich Lukovnikov

13-21
- PDF (Русский)
Improved of methods of monitoring the starting characteristics of serial Auxiliary Gas Turbine Engine using the statistical analysis

Anatoliy Yurevich Chechulin

22-28
- PDF (Русский)
Methods and models predicting the complexity of manufacturing aircraft gas turbine engines

Zhanna Minifanurovna Kadyrova, Viktor Leonidovich Yurev

29-36
- PDF (Русский)
Forecasting model the complexity of manufacturing nacelles civil Aviation gas turbine engine in CAM

Viktor Leonidovich Yurev, Irik Migranovich Irkabaev, Nadezhda Aleksandrovna Suhova, Zhanna Minifanurovna Kadyrova

37-44
- PDF (Русский)
Test methods of turbine blades at high temperature gas corrosion

Anas Saidovich Gishvarov, Marsel Nikolaevich Davydov

45-54
- PDF (Русский)
Methods and development control systems resource depletion CCD of USE

Dmitriy Gennadevich Fedorchenko

55-61
- PDF (Русский)
Technological methods to improve the reliability of gasturbine engine

Dmitriy Gennadevich Fedorchenko, Dmitriy Konstantinovich Novikov

62-66
- PDF (Русский)

Differential transmission of the vehicle

Hakimzyan Amirovich Fashiev, Vladimir Vladimirovich Voloshko, Ildus Rifovich Mavleev, Ildar Ilgizarovich Salahov

67-71
- PDF (Русский)
Features of dynamic properties of mechanical oscillatory system at power and kinematic indignations

Evgeniy Vitalevich Kaimov

72-78
- PDF (Русский)
Prediction of the fatigue limit of surface hardened shafts with pressed sleeve on residual stresses

Valentin Fedorovich Pavlov, Vyacheslav Petrovich Sazanov, Oksana Valerievna Karanaeva, Aleksey Stanislavovich Bukatyy, Vladislav Eduardovich Kostichev

79-84
- PDF (Русский)
Potentiodynamic and corrosion studies of promising new titanium alloys with the addition of molybdenum

Nailya Anvarovna Amirhanova, Azat Renatovich Hasanov

85-91
- PDF (Русский)
Simulation of precision non-stationary electrochemical machining with circle and plate electrode-tool

Vladimir Pavlovich Zhitnikov, Roza Ravilevna Muksimova, Askar Aleksandrovich Zaripov

92-99
- PDF (Русский)
Evaluation of the Surface Material Strength Using the "Scratch-Test" Method

Konstantin Sergeevich Selivanov

100-106
- PDF (Русский)
Neural network method of optimization of innovative technologies

Sergey Grigorevich Selivanov, Oksana Aleksandrovna Gavrilova (Borodkina)

107-114
- PDF (Русский)
Effectiveness evaluation of production process control using simulation modeling based on queuing systems

Albina Faritovna Galiullina, Svetlana Valerevna Silnova, Liliya Rashitovna Chernyahovskaya

115-122
- PDF (Русский)

Research and analyses of natural factors, which are influence on metrological characteristics of magnetometric inclinometers

Andrey Vladimirovich Vorobev, Gulnara Ravilevna Shakirova, Galina Alekseevna Ivanova

123-131
- PDF (Русский)
Development algorithm to improve the positioning accuracy of the mobile station based on the calculation static electromagnetic field parameters in inhomogeneous media

Kirill Nikolaevich Zotov, Igor Vasilevich Kuznecov, Viktor Nikolaevich Akulshin, Ilzira Islamovna Gumerova

132-137
- PDF (Русский)
Decision support information for the design of communications equipment on the basis of the "House of Quality"

Vladimir Efimovich Gvozdev, Roksana Rafailevna Kurunova, Ayrat Yulaevich Hasanov

138-146
- PDF (Русский)
Immunity to interference self-adjusting measurer temperature of the gas turbine engine

Valeriy Ivanovich Petunin, Radmir Railevich Sibagatullin, Arkadiy Isaakovich Frid

147-155
- PDF (Русский)

Markov birth-death chain in reliability models of technical systems

Pavel Azizurovich Rahman, Aleksandr Ignatevich Kayashev, Marsel Ilgizovich Sharipov

156-170
- PDF (Русский)
Risk assessment software information and control systems for high-risk industrial enterprises in terms of interval of initial data vagueness

Anna Evgenevna Kolodenkova

171-178
- PDF (Русский)
Method of forming a database for learning expert system to evaluate stability of the welder

Igor Vladimirovich Kuzmenko, Aleksandr Nikolaevich Gricyna

179-184
- PDF (Русский)
Mathematical model of impurities in the atmospheric boundary layer and its program implementation on a multiprocessor computer system

Aleksandr Ivanovich Suhinov, Dianna Samvelovna Hachunc, Aleksandr Evgenevich Chistyakov

185-195
- PDF (Русский)
Supercomputer modeling in coefficient inverse problems of wave tomography with attenuation

Sergey Yurevich Romanov

196-203
- PDF (Русский)
Using of RESTful-services in situationally-oriented databases

Artem Sergeevich Gusarenko, Valeriy Viktorovich Mironov

204-211
- PDF (Русский)
Adaptive method for FREAK: Fast Retina Keypoint

Anton Renatovich Nurgatin

212-214
- PDF (Русский)
Another approach to designing reversible operations in software

Maksim Maratovich Gumerov

215-218
- PDF (Русский)
Method the design of adaptive software system based on the methodology categorical formal model of open subject area

Vyacheslav Viktorovich Antonov

219-224
- PDF (Русский)
Reliability models of the fault-tolerant storage systems

Pavel Azizurovich Rahman, Aleksandr Ignatevich Kayashev, Marsel Ilgizovich Sharipov

225-236
- PDF (Русский)
Parallelization on GPUs of NPB 3.3 NAS tests on language Fortran DVMH

Valeriy Fedorovich Aleksahin, Vladimir Aleksandrovich Bahtin, Olga Fedorovna Zhukova, Aleksandr Sergeevich Kolganov, Viktor Alekseevich Kryukov, Nataliya Viktorovna Podderyugina, Mihail Nikolaevich Pritula, Olga Antonievna Savickaya, Aleksey Vladimirovich Shubert

237-247
- PDF (Русский)
Development planning model of used information protection means for electronic trading platform information system

Emma Emanuilovna Yandybaeva, Irina Vladimirovna Mashkina

248-253
- PDF (Русский)
Сontrol system design innovation environment Socioeconomic system

Lyalya Zakievna Fathullina, Larisa Vladimirovna Shabaltina

254-261
- PDF (Русский)
Reliability model of fault-tolerant border routing with two Internet service providers

Pavel Azizurovich Rahman, Aleksandr Ignatevich Kayashev, Marsel Ilgizovich Sharipov

262-270
- PDF (Русский)
Two-level model of management of competitiveness of the enterprise

Hakimzyan Amirovich Fashiev, Anna Vladimirovna Krahmaleva

271-287
- PDF (Русский)

Vol. 19 No. 1 (67) (2015): Вестник УГАТУ

2D flow calculation investigation method for GTE multistage axial compressors

Optimization of the working process parameters of a turbofan engine of high-altitude unmanned aerial vehicle

Improved of methods of monitoring the starting characteristics of serial Auxiliary Gas Turbine Engine using the statistical analysis

Methods and models predicting the complexity of manufacturing aircraft gas turbine engines

Forecasting model the complexity of manufacturing nacelles civil Aviation gas turbine engine in CAM

Test methods of turbine blades at high temperature gas corrosion

Methods and development control systems resource depletion CCD of USE

Technological methods to improve the reliability of gasturbine engine

Differential transmission of the vehicle

Features of dynamic properties of mechanical oscillatory system at power and kinematic indignations

Prediction of the fatigue limit of surface hardened shafts with pressed sleeve on residual stresses

Potentiodynamic and corrosion studies of promising new titanium alloys with the addition of molybdenum

Simulation of precision non-stationary electrochemical machining with circle and plate electrode-tool

Evaluation of the Surface Material Strength Using the "Scratch-Test" Method

Neural network method of optimization of innovative technologies

Effectiveness evaluation of production process control using simulation modeling based on queuing systems

Research and analyses of natural factors, which are influence on metrological characteristics of magnetometric inclinometers

Development algorithm to improve the positioning accuracy of the mobile station based on the calculation static electromagnetic field parameters in inhomogeneous media

Decision support information for the design of communications equipment on the basis of the "House of Quality"

Immunity to interference self-adjusting measurer temperature of the gas turbine engine

Markov birth-death chain in reliability models of technical systems

Risk assessment software information and control systems for high-risk industrial enterprises in terms of interval of initial data vagueness

Method of forming a database for learning expert system to evaluate stability of the welder

Mathematical model of impurities in the atmospheric boundary layer and its program implementation on a multiprocessor computer system

Supercomputer modeling in coefficient inverse problems of wave tomography with attenuation

Using of RESTful-services in situationally-oriented databases

Adaptive method for FREAK: Fast Retina Keypoint

Another approach to designing reversible operations in software

Method the design of adaptive software system based on the methodology categorical formal model of open subject area

Reliability models of the fault-tolerant storage systems

Parallelization on GPUs of NPB 3.3 NAS tests on language Fortran DVMH

Development planning model of used information protection means for electronic trading platform information system

Сontrol system design innovation environment Socioeconomic system

Reliability model of fault-tolerant border routing with two Internet service providers

Two-level model of management of competitiveness of the enterprise

Information

Make a Submission

Language